Clutch Assy DENSO 10P30C compressor SUIT COASTER BUS

All types of compressor clutch 10P30C, including Belt Groove as follows: A, 2A, B, 2B, double O. The information here is just one of these models and if it is not you want, please let me know your car model, year and engine model.

Content

1.What car model 10p30c compressor clutch fit for?

2.Which clutch fit for me: 10P30C or 10P30B?

3.Technical details for 10P30C compressor clutch

4.AC compressor Clutch hub remove for Toyota

5.Clutch hub installation process for coaster

6.What guarantees provide for 10P30C coaster clutch?

7.What is this clutch or replacement policy?

8.Troubleshoot checklist on compressor clutch

9.Do you supply technical support for 10P30C clutch?

10.What other customers order together with clutch?

11.Toyota coaster clutch frame structure display

12.Bus AC compressor clutch for Toyota coaster pictures

What car model 10P30C compressor clutch fit for?

This bus ac compressor clutch 10P30C fit for all TOYOTA Coaster models up to now. TOYOTA Coaster made in USA, Japan and China. Fit for TOYOTA Coaster mini bus with compressor 10P30C & Denso compressor 10P30B.

Which clutch fit for me: 10P30C or 10P30B?

It will be judge from the following 2 points: 1).Where is your Coaster place of original? 2).Which year of your Coaster? Please confirm us the above information, our engineers will check for you easily!

3. Technical details for 10P30C compressor clutch:

4. AC compressor Clutch hub Remove for Toyota

1. Remove clutch retaining ring or nut. Use a spanner wrench to prevent the hub plate from turning.

2. Attach the tool to the end plate by threading the outer nut of the tool into the center hole of the clutch end plate.

3. Tighten the inner tool arbor against the end of the compressor shaft to lift the plate.

5. Clutch hub Installation process for coaster

1. Position the shaft key in place.

2. Slide the clutch hub onto the shaft of the compressor. Be careful not to damage the components by using excess force.

3. Thread the inner part of the tool onto the shaft. Tighten the outer nut of the tool to push the shaft key in.

4. Set the air gap. Add or remove shims to obtain the mfg. specifications. Always set at the min. number and measure at multiple points around the circumference.

5. Reinstall the retaining ring or nut.

6. Check oil level and rotate the hub with the nose of the compressor down to help lubricate. You can check for ease of rotation.

6. What guarantees provide for 10P30C compressor clutch?

We give 1 year warranty for this clutch. At the same time, we also provide repair service.

7. What is this clutch or replacement policy?

We will confirm all the necessary information before you place order. If this compressor clutch not fit for your compressor, we will accept return or replacement. All the shipping cost caused will be paid by our company.

8. Troubleshoot checklist on compressor clutch

For failure diagnosis of the clutch being replaced, use the guide below to troubleshoot the new clutch.

 

A. Symptom: Clutch will not disengage

Possible Causes

Solution

• Improper hub/armature to rotor/pulley air gap (too small)

• Reset air gap

• Current is always on

• Check electrical system

• Rotor/pulley snap ring not installed correctly

• Install per instructions

B. Symptom: Clutch will not engage

Possible Causes

Solution

• Improper hub/armature to rotor/pulley air gap (too big)

• Reset air gap

• Field coil electrical wiring is not connected

• Connect field coil wiring

• Faulty field coil

• Check field coil for continuity

• Less than 10.8 volts supplied to field coil (all accessories on)

• Check electrical system

C. Symptom: Clutch is noisy

Possible Causes

Solution

• Field coil or rotor pulley snap rings are not installed correctly

• Check for correct installation

• Belts too loose

• Tighten per A/C manufacturer’s service manual

• Bearing noisy (new clutch only)

• Return to manufacturer

• Clutch not burnished

• Burnish per instructions

D. Symptom: Clutch slips

Possible Causes

Solution

• Belts too loose

• Tighten per A/C manufacturer’s service manual

• Voltage to field coil less than 10.8 volts (all accessories on)

• Check electrical system

• Improper wiring or connections

• Check electrical system

• Oil or grease on friction surfaces

• Replace clutch

• Clutch not burnished

• Burnish clutch per instructions

9. Do you supply technical support for 10P30C clutch?

Our engineers have experience with auto ac repair and exchange. If you order from us, we are not only sell you product, we will also send tech files together with the clutch: air conditioner maintenance project details and exchange instruction file. We will make sure you use it correctly and happily.

10. What other customers order together with clutch?

Toyota COASTER air conditioning compressor, Shaft Seal, ac fan, ac motor, expansion valve etc all related to ac system, you can find satisfy one in Shumatt.

11. Toyota coaster clutch frame structure display

Clutch

12. Bus AC compressor clutch for Toyota coaster pictures

ClutchClutch

Contact Us

Tel: +(86) 755-23215133
Mobile: +(86)13410541523
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Web : http://www.autoacpart.com

skypeyou tubefacebook